valve handwheels, metal nameplates and fastener kits from Wenzhou to the United Kingdom by truck freight: size/model pairing, nameplate scratch protection and heavy/small-part zoning

Define the actual valve handwheels, metal nameplates and fastener kits

Build the set by valve project, nominal size, model, handwheel diameter, material, colour, nameplate revision and fastener specification. Obsolete plates need a clearly separated purpose, and spare hardware is counted outside the installed-set quantity.

Packing for size/model pairing, nameplate scratch protection and heavy/small-part zoning

Layer handwheels by size with protected rims and centre bores. Sandwich nameplates between clean rigid sheets, retain release liners on adhesive backs, and place bolts and nuts in sealed hard boxes so dense metal cannot scratch the plate faces.

Handover checklist in Wenzhou

A project-set table should reconnect the handwheel, approved plate and fastener box after the shipment is opened. Pallet records include centre of gravity, stackability and inner-box IDs so pairing survives even if an outer carton is damaged.

• Exact item name, material, use and model
• Project, revision, specification, lot and quantity
• Evidence of size/model pairing, nameplate scratch protection and heavy/small-part zoning
• Inner-position, carton and photograph mapping
• Truthful transport-property declaration
• Final gross weight and outer dimensions
• Wenzhou handover point and ready time
• the United Kingdom postcode, department, appointment and unloading conditions

Confirm truck freight with final package data

Treat the identification plate as controlled project information, not generic packing material. Plate language, serial range, flow arrow and fixing-hole pattern should match the corresponding handwheel and valve list. Separate heavy cast handwheels from thin stamped plates with rigid compartments, and count washers inside each fastener box rather than at pallet total. The UK receiving team can then issue one sealed kit per equipment position without opening other projects or losing spare quantities.

Receipt and evidence in the United Kingdom

The UK warehouse should decide whether to distribute by project, equipment position or valve size. Check plate revision and coating before mixing kits; shortage, dents or torn small-parts boxes must be recorded before hardware is reassembled.

Frequently asked questions